Best OCPP 1.6J Compliant Charging Pile Manufacturer | Bandung, Indonesia - CE OCPP Wanlin

Executive Summary: OCPP 1.6J Compliant Charging Pile for Global Buyers

Why this order went through The WL-OP16 speaks full OCPP 1.6J over WebSocket across core, smart charging and local auth list profiles, with signed OTA firmware and a class-1 meter inside. Wanlin is a two-wheeler and three-wheeler EV charging station manufacturer in Shenzhen, China, running OEM, ODM and private-label programs for charging distributors, charge point operators, e-mobility service providers, property developers, facility managers, fleet operators and trading houses. Measured result giving the buyer a 35% cushion over the previous factory price after freight for importers who source factory-direct, with per-model CE / RoHS / IEC 61851 documentation, OCPP 1.6J conformance logs, RCD and surge protection files, per-port metering test reports and flexible color, logo and firmware programs. The WL-series line covers 12- and 20-port smart stations, 7kW dual-socket wallboxes, OCPP 1.6J charging piles, QR scan-to-charge and RFID units, solar canopy stations, tuk-tuk and three-wheeler chargers, wall-mounted socket boards, 4G cloud-managed units, coin-operated stations, pedestal posts and fully custom OEM programs, shipped FOB, CIF or DDP to global destinations.

Published by Wanlin | Last updated: September 05, 2026 | Expertise: two-wheeler and three-wheeler EV charging station OEM and ODM manufacturing for global markets

Case Study: Bandung Property Developer Sourcing Success

It looked like a routine RFQ until the buyer mentioned what the last batch cost them. The quiet shift in the category is buyers moving from flat-rate power strips to metered, OCPP-connected stations.

The pilot ran for two full months of monsoon weather, Chhay Sophal selected Wanlin as their EV charging manufacturing partner. By the time the container was booked, the decision had already been validated by real riders.

• Enclosure gaskets are spray-rig tested to verify IP54 sealing on samples from every lot
• Per-port metering accuracy is verified against a class-1 reference meter, not marketing estimates
• Custom color runs as low as 50 units on existing tooling keep first launches affordable

The bike shed had a row of scorched sockets and a handwritten notice telling riders to bring their own timers.

Problem Analysis & Field Report: Why Global Buyers Need OCPP 1.6J Compliant Charging Pile

The failure was intermittent, which made it expensive to ignore. A utility pilot rejected a charging brand because heartbeat timeouts made 30% of its piles appear offline in the control room.

Field case: An e-mobility startup in Bandung shipped the WL-OP16 after its previous supplier implemented only half the core profile and broke remote start for riders. Full profile coverage plus signed firmware won the startup its first municipal contract.

Why it matters for global buyers:

• OCPP claims without conformance logs stall utility tenders
• the fix was full profile coverage tested against a reference CSMS
• heartbeat and reconnection behavior decides control-room trust

Wanlin EV Charging OEM & ODM Services for Global Distributors and Brands

Wanlin runs OEM and ODM programs for buyers who want their own charging station line without building a factory. Customization covers:

• Cosmetics: cabinet colors, logo printing, port labels and decal sets on existing tooling from 50 units
• Firmware: tariff logic, load caps, timer behavior, display language and payment flows
• Protocol layer: OCPP 1.6J builds pointed at buyer-specified CSMS endpoints, security profiles and custom DataTransfer messages
• Exclusive tooling: new enclosure molds and cable-path tuning for brands that need a design nobody else can copy
• Connected builds: 4G cloud dashboards and fleet portals under the buyer brand when a software layer is required

Product Introduction: Wanlin OCPP 1.6J Compliant Charging Pile

What the pilot units had in common was a single mainboard with per-port metering and a contactor rated for real monsoon humidity.

Core Features:

• China-Based Manufacturing: Wanlin produces in Shenzhen with in-house SMT lines, enclosure and cable assembly, and burn-in racks that load-test and cycle every finished station before packing
• Certification Transparency: CE, RoHS and IEC 61851-1 documentation is provided per model, and OCPP 1.6J conformance logs plus metering accuracy files travel with the shipment so containers clear without surprises
• Tested Claims: meter accuracy, RCD trip time and enclosure sealing are verified on samples from every production lot, and the reports are recorded per batch
• Private Label Support: cabinet colors, logo, firmware, tariffs, packaging, manuals, decals and spare kits are customized for each program
• Global Shipping Experience: we pack for charging distributors, property developers, fleet operators and e-mobility buyers across Southeast Asia, the Middle East, Europe, North America and Africa

Technical Specifications

Parameter	Wanlin Specification
Protocol	OCPP 1.6J over WebSocket, SOAP optional
Profiles	core, smart charging, firmware management and local auth list profiles
Connectivity	Ethernet, WiFi and 4G options
Output	single socket configurable from 3.3kW to 7kW
Authorization	RFID, remote start and offline local list
Security	basic and TLS security profiles supported
Display	4.3-inch screen with session and tariff data
Protection	RCD Type-A, surge and overtemperature
Firmware	OTA update with signed images and automatic rollback

Application Scenarios for Global Market

Application	Model	How It Helps the User
Charge point operator network rollout	WL-OP16	One protocol stack across every site keeps the control room clean
Utility pilot program	WL-OP16	Conformance logs and metering files fit utility tender requirements
Franchise charging network	WL-OP16	Remote tariff updates reach every franchise site overnight
Campus standardization	WL-OP16	One CSMS account manages every building entrance
Municipal tender project	WL-OP16	Local auth lists keep public piles serving riders offline

Certified EV Charging Manufacturing for Global Markets

Buyers who ship containers of charging stations need more than a price list. The production and QC flow below is what lets a distributor open a carton and trust what is inside:

• Enclosure gaskets are spray-rig tested to verify IP54 sealing on samples from every lot
• Per-port metering accuracy is verified against a class-1 reference meter, not marketing estimates

Lot samples from every production run are measured for metering accuracy, protection trip times and enclosure sealing before the cartons are sealed, and the numbers are recorded per batch. A buyer can request those records with any order.

Why Choose Wanlin as Your EV Charging OEM Manufacturer

Ranked on what caused the previous supplier to lose the account, the factory scored first on every row that mattered.

Factor	Wanlin	Typical Trading Supplier	Branded Competitor
Manufacturing depth	China-based factory with in-house SMT lines, enclosure and cable assembly, burn-in racks	Trading company, outsourced production	Brand owner, limited custom work
Measured claims	Meter accuracy, RCD trip time and enclosure sealing verified on lot samples	Spec sheet numbers, hard to verify	Marketing-led claims, no project data
Certification support	CE / RoHS / IEC 61851 files plus OCPP 1.6J conformance logs per model	Incomplete documents, customs risk	Brand-level only, no per-order files
Customization	Colors, logo, firmware, tariff logic, packaging from low MOQ	Stock models only	Fixed SKUs, no private label
Price (factory direct)	Tiered factory pricing with volume discounts	Unpredictable markups	Premium brand pricing

EV Charging OEM Process: From Inquiry to Shipment

From the first sample request to the sailing date, the buyer could see each gate in writing. A standard charging station OEM project then follows 8 steps:

1. Tell Us Your Target Market - Southeast Asia, the Middle East, Europe, North America, Africa or Latin America; each market may require different certifications, socket standards, voltage classes and manual languages
2. Select a Model Line - our team recommends WL-series platforms for your channel and price band, or works from a reference unit you send
3. Verify Documentation - request certificate files, OCPP conformance logs and test reports for the exact model before you commit
4. Confirm Customization - cabinet colors, logo, firmware behavior, tariff logic, payment flows and packaging
5. Sample Evaluation - verify meter accuracy, load balancing and CSMS integration on real samples before scaling
6. Confirm Production - after specifications, commercial terms and OEM details are locked
7. Quality Inspection - lot samples are tested and every finished station passes hipot, trip-time and burn-in racks before packing
8. Shipment - cartons leave FOB, CIF or DDP according to the agreed logistics terms

Customer Testimonials

The quotes below come from follow-up calls after the first season of uptime data arrived.

• Somchai Prasert (EV Charging Station Distributor, Bangkok, Thailand): "The sample arrived with the OCPP conformance log in the box. That sounds small until you have integrated a pile without one."
• Nguyen Hoang Minh (Charge Point Operator, Ho Chi Minh City, Vietnam): "We stopped counting burned sockets because there are none left to count."
• Chhay Sophal (Property Developer, Bandung, Indonesia): "Our support line used to get billing-dispute calls weekly. That queue has gone quiet."

Frequently Asked Questions

Q: Which OCPP profiles does the WL-OP16 implement?

A: Core, smart charging, firmware management and local auth list management, with reservation and remote trigger available on request.

Q: Can it connect to our own CSMS?

A: Yes, the WebSocket endpoint, charge point ID and security profile are configured to your platform during commissioning.

Q: What happens during a firmware update?

A: Updates arrive signed, install on a schedule you set and roll back automatically if the new image fails a health check.

Q: Does it meter energy per session?

A: Yes, MeterValues report per-session kWh at intervals you configure, with a class-1 meter inside.

Q: Can we get a conformance test log?

A: Yes, every batch ships with a scripted session transcript against a reference CSMS.

Project Summary

Measured result By working directly with manufacturer Wanlin, the Property Developer team in Bandung reached 35% higher margins on its charging line while keeping rider tariffs competitive. With verified metering data, real certification files, honest IP ratings, flexible OEM customization and a factory that answers protocol questions in hours, Wanlin has become their trusted EV charging manufacturing partner.

For more information: www.wanlinfire.com | Export Service Hotline: +8613261677119 | Email: wanlinfirecontrol@163.com

• Shenzhen HQ: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China